Browse Source

Move firewall functions into app scripts

stockholm
Bob Mottram 5 years ago
parent
commit
bc76f9237f
  1. 15
      src/freedombone-app-babel
  2. 13
      src/freedombone-app-batman
  3. 783
      src/freedombone-app-cjdns
  4. 21
      src/freedombone-app-dlna
  5. 28
      src/freedombone-app-email
  6. 21
      src/freedombone-app-ipfs
  7. 23
      src/freedombone-app-irc
  8. 19
      src/freedombone-app-mumble
  9. 44
      src/freedombone-app-sip
  10. 13
      src/freedombone-app-syncthing
  11. 19
      src/freedombone-app-tox
  12. 26
      src/freedombone-app-xmpp
  13. 20
      src/freedombone-app-zeronet
  14. 273
      src/freedombone-utils-firewall

15
src/freedombone-app-babel

@ -32,6 +32,21 @@
ENABLE_BABEL="no"
BABEL_PORT=6696
function configure_firewall_for_babel {
if grep -Fxq "configure_firewall_for_babel" $COMPLETION_FILE; then
return
fi
if [[ $ENABLE_BABEL != "yes" ]]; then
return
fi
iptables -A INPUT -i $WIFI_INTERFACE -p udp --dport $BABEL_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("Babel $BABEL_PORT")
echo 'configure_firewall_for_babel' >> $COMPLETION_FILE
}
function mesh_babel {
if grep -Fxq "mesh_babel" $COMPLETION_FILE; then
return

13
src/freedombone-app-batman

@ -32,6 +32,19 @@
ENABLE_BATMAN="no"
BATMAN_CELLID='any'
function configure_firewall_for_batman {
if grep -Fxq "configure_firewall_for_batman" $COMPLETION_FILE; then
return
fi
if [[ $ENABLE_BATMAN != "yes" ]]; then
return
fi
function_check save_firewall_settings
save_firewall_settings
echo 'configure_firewall_for_batman' >> $COMPLETION_FILE
}
function mesh_batman {
if grep -Fxq "mesh_batman" $COMPLETION_FILE; then
return

783
src/freedombone-app-cjdns

@ -40,408 +40,425 @@ CJDNS_COMMIT='13189fde111d0500427a7a0ce06a970753527bca'
CJDCMD_REPO="https://github.com/inhies/cjdcmd"
CJDCMD_COMMIT='973cca6ed0eecf9041c3403a40193c0b1291b808'
function configure_firewall_for_cjdns {
if grep -Fxq "configure_firewall_for_cjdns" $COMPLETION_FILE; then
return
fi
if [[ $ENABLE_CJDNS != "yes" ]]; then
return
fi
ip6tables -t nat -A POSTROUTING -o tun0 -j MASQUERADE
ip6tables -A FORWARD -i tun0 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
echo 'configure_firewall_for_cjdns' >> $COMPLETION_FILE
}
function get_cjdns_public_key {
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "cjdns public key" /home/$MY_USERNAME/README; then
if [ ! $CJDNS_PUBLIC_KEY ]; then
CJDNS_PUBLIC_KEY=$(cat /home/$MY_USERNAME/README | grep "cjdns public key" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
fi
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "cjdns public key" /home/$MY_USERNAME/README; then
if [ ! $CJDNS_PUBLIC_KEY ]; then
CJDNS_PUBLIC_KEY=$(cat /home/$MY_USERNAME/README | grep "cjdns public key" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
fi
}
function get_cjdns_private_key {
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "cjdns private key" /home/$MY_USERNAME/README; then
if [ ! $CJDNS_PRIVATE_KEY ]; then
CJDNS_PRIVATE_KEY=$(cat /home/$MY_USERNAME/README | grep "cjdns private key" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
fi
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "cjdns private key" /home/$MY_USERNAME/README; then
if [ ! $CJDNS_PRIVATE_KEY ]; then
CJDNS_PRIVATE_KEY=$(cat /home/$MY_USERNAME/README | grep "cjdns private key" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
fi
}
function get_cjdns_ipv6_address {
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "cjdns IPv6 address" /home/$MY_USERNAME/README; then
if [ ! $CJDNS_IPV6 ]; then
CJDNS_IPV6=$(cat /home/$MY_USERNAME/README | grep "cjdns IPv6 address" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
fi
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "cjdns IPv6 address" /home/$MY_USERNAME/README; then
if [ ! $CJDNS_IPV6 ]; then
CJDNS_IPV6=$(cat /home/$MY_USERNAME/README | grep "cjdns IPv6 address" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
fi
}
function get_cjdns_port {
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "cjdns port" /home/$MY_USERNAME/README; then
if [ ! $CJDNS_PORT ]; then
CJDNS_PORT=$(cat /home/$MY_USERNAME/README | grep "cjdns port" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
fi
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "cjdns port" /home/$MY_USERNAME/README; then
if [ ! $CJDNS_PORT ]; then
CJDNS_PORT=$(cat /home/$MY_USERNAME/README | grep "cjdns port" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
fi
}
function get_cjdns_password {
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "cjdns password" /home/$MY_USERNAME/README; then
if [ ! $CJDNS_PASSWORD ]; then
CJDNS_PASSWORD=$(cat /home/$MY_USERNAME/README | grep "cjdns password" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
fi
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "cjdns password" /home/$MY_USERNAME/README; then
if [ ! $CJDNS_PASSWORD ]; then
CJDNS_PASSWORD=$(cat /home/$MY_USERNAME/README | grep "cjdns password" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
fi
}
function mesh_cjdns {
if [[ $ENABLE_CJDNS != "yes" ]]; then
return
fi
# update to the next commit
function_check set_repo_commit
set_repo_commit /etc/cjdns "cjdns commit" "$CJDNS_COMMIT" $CJDNS_REPO
if grep -Fxq "mesh_cjdns" $COMPLETION_FILE; then
return
fi
apt-get -y install nodejs git build-essential nmap
# if a README exists then obtain the cjdns parameters
function_check get_cjdns_ipv6_address
get_cjdns_ipv6_address
function_check get_cjdns_public_key
get_cjdns_public_key
function_check get_cjdns_private_key
get_cjdns_private_key
function_check get_cjdns_port
get_cjdns_port
function_check get_cjdns_password
get_cjdns_password
# special compile settings for running ./do on the Beaglebone Black
if [[ $INSTALLING_ON_BBB == "yes" ]]; then
CFLAGS="-O2 -march=armv7-a -mtune=cortex-a8 -mfpu=neon -ftree-vectorize -ffast-math -mfloat-abi=hard -marm -Wno-error=maybe-uninitialized"
export LDFLAGS="$CFLAGS"
fi
if [ ! -d /etc/cjdns ]; then
function_check git_pull
git_clone $CJDNS_REPO /etc/cjdns
cd /etc/cjdns
git checkout $CJDNS_COMMIT -b $CJDNS_COMMIT
if ! grep -q "cjdns commit" $COMPLETION_FILE; then
echo "cjdns commit:$CJDNS_COMMIT" >> $COMPLETION_FILE
else
sed -i "s/cjdns commit.*/cjdns commit:$CJDNS_COMMIT/g" $COMPLETION_FILE
fi
./do
if [ ! "$?" = "0" ]; then
exit 7439
fi
# create a configuration
if [ ! -f /etc/cjdns/cjdroute.conf ]; then
./cjdroute --genconf > /etc/cjdns/cjdroute.conf
if [ ! "$?" = "0" ]; then
exit 5922
fi
fi
# create a user to run as
useradd cjdns
else
cd /etc/cjdns
function_check git_pull
git_pull $CJDNS_REPO
./do
if [ ! "$?" = "0" ]; then
exit 9926
fi
fi
# set permissions
chown -R cjdns:cjdns /etc/cjdns
chmod 600 /etc/cjdns/cjdroute.conf
/sbin/ip tuntap add mode tun user cjdns dev cjdroute0
# insert values into the configuration file
if [ $CJDNS_PRIVATE_KEY ]; then
sed -i "s/\"privateKey\":.*/\"privateKey\": \"$CJDNS_PRIVATE_KEY\",/g" /etc/cjdns/cjdroute.conf
else
CJDNS_PRIVATE_KEY=$(cat /etc/cjdns/cjdroute.conf | grep '"privateKey"' | awk -F '"' '{print $4}' | sed -n 1p)
fi
if [ $CJDNS_PUBLIC_KEY ]; then
sed -i "s/\"publicKey\":.*/\"publicKey\": \"$CJDNS_PUBLIC_KEY\",/g" /etc/cjdns/cjdroute.conf
else
CJDNS_PUBLIC_KEY=$(cat /etc/cjdns/cjdroute.conf | grep '"publicKey"' | awk -F '"' '{print $4}' | sed -n 1p)
fi
if [ $CJDNS_IPV6 ]; then
sed -i "s/\"ipv6\":.*/\"ipv6\": \"$CJDNS_IPV6\",/g" /etc/cjdns/cjdroute.conf
else
CJDNS_IPV6=$(cat /etc/cjdns/cjdroute.conf | grep '"ipv6"' | awk -F '"' '{print $4}' | sed -n 1p)
fi
if [ $CJDNS_PASSWORD ]; then
sed -i "0,/{\"password\":.*/s//{\"password\": \"$CJDNS_PASSWORD\"}/g" /etc/cjdns/cjdroute.conf
else
CJDNS_PASSWORD=$(cat /etc/cjdns/cjdroute.conf | grep '"password"' | awk -F '"' '{print $4}' | sed -n 1p)
fi
if [ $CJDNS_PORT ]; then
sed -i "s/\"bind\": \"0.0.0.0:.*/\"bind\": \"0.0.0.0:$CJDNS_PORT\",/g" /etc/cjdns/cjdroute.conf
else
CJDNS_PORT=$(cat /etc/cjdns/cjdroute.conf | grep '"bind": "0.0.0.0:' | awk -F '"' '{print $4}' | awk -F ':' '{print $2}' | sed -n 1p)
fi
function_check enable_ipv6
enable_ipv6
echo '#!/bin/sh -e' > /etc/init.d/cjdns
echo '### BEGIN INIT INFO' >> /etc/init.d/cjdns
echo '# hyperboria.sh - An init script (/etc/init.d/) for cjdns' >> /etc/init.d/cjdns
echo '# Provides: cjdroute' >> /etc/init.d/cjdns
echo '# Required-Start: $remote_fs $network' >> /etc/init.d/cjdns
echo '# Required-Stop: $remote_fs $network' >> /etc/init.d/cjdns
echo '# Default-Start: 2 3 4 5' >> /etc/init.d/cjdns
echo '# Default-Stop: 0 1 6' >> /etc/init.d/cjdns
echo '# Short-Description: Cjdns router' >> /etc/init.d/cjdns
echo '# Description: A routing engine designed for security, scalability, speed and ease of use.' >> /etc/init.d/cjdns
echo '# cjdns git repo: https://github.com/cjdelisle/cjdns/' >> /etc/init.d/cjdns
echo '### END INIT INFO' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo 'PROG="cjdroute"' >> /etc/init.d/cjdns
echo 'GIT_PATH="/etc/cjdns"' >> /etc/init.d/cjdns
echo 'PROG_PATH="/etc/cjdns"' >> /etc/init.d/cjdns
echo 'CJDNS_CONFIG="cjdroute.conf"' >> /etc/init.d/cjdns
echo 'CJDNS_USER="cjdns"' >> /etc/init.d/cjdns
echo "CJDNS_IP='$CJDNS_IPV6'" >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo 'start() {' >> /etc/init.d/cjdns
echo ' # Start it up with the user cjdns' >> /etc/init.d/cjdns
echo ' if [ $(pgrep cjdroute | wc -l) != 0 ];' >> /etc/init.d/cjdns
echo ' then' >> /etc/init.d/cjdns
echo ' echo "cjdroute is already running. Doing nothing..."' >> /etc/init.d/cjdns
echo ' else' >> /etc/init.d/cjdns
echo ' echo " * Starting cjdroute"' >> /etc/init.d/cjdns
echo ' su -c "$PROG_PATH/$PROG < $PROG_PATH/$CJDNS_CONFIG" - $CJDNS_USER' >> /etc/init.d/cjdns
echo ' /sbin/ip addr add $CJDNS_IP/8 dev tun0' >> /etc/init.d/cjdns
echo ' /sbin/ip link set mtu 1312 dev tun0' >> /etc/init.d/cjdns
echo ' /sbin/ip link set tun0 up' >> /etc/init.d/cjdns
echo ' /sbin/ip tuntap add mode tun user cjdns dev tun0' >> /etc/init.d/cjdns
echo ' fi' >> /etc/init.d/cjdns
echo '}' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo 'stop() {' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo ' if [ $(pgrep cjdroute | wc -l) != 2 ];' >> /etc/init.d/cjdns
echo ' then' >> /etc/init.d/cjdns
echo ' echo "cjdns isnt running."' >> /etc/init.d/cjdns
echo ' else' >> /etc/init.d/cjdns
echo ' echo "Killing cjdroute"' >> /etc/init.d/cjdns
echo ' killall cjdroute' >> /etc/init.d/cjdns
echo ' fi' >> /etc/init.d/cjdns
echo '}' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo 'status() {' >> /etc/init.d/cjdns
echo ' if [ $(pgrep cjdroute | wc -l) != 0 ];' >> /etc/init.d/cjdns
echo ' then' >> /etc/init.d/cjdns
echo ' echo "Cjdns is running"' >> /etc/init.d/cjdns
echo ' else' >> /etc/init.d/cjdns
echo ' echo "Cjdns is not running"' >> /etc/init.d/cjdns
echo ' fi' >> /etc/init.d/cjdns
echo '}' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo ' update() {' >> /etc/init.d/cjdns
echo ' cd $GIT_PATH' >> /etc/init.d/cjdns
echo ' echo "Updating..."' >> /etc/init.d/cjdns
echo ' git pull' >> /etc/init.d/cjdns
echo ' ./do' >> /etc/init.d/cjdns
echo '}' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo '## Check to see if we are running as root first.' >> /etc/init.d/cjdns
echo 'if [ "$(id -u)" != "0" ]; then' >> /etc/init.d/cjdns
echo ' echo "This script must be run as root" 1>&2' >> /etc/init.d/cjdns
echo ' exit 1' >> /etc/init.d/cjdns
echo 'fi' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo 'case $1 in' >> /etc/init.d/cjdns
echo ' start)' >> /etc/init.d/cjdns
echo ' start' >> /etc/init.d/cjdns
echo ' exit 0' >> /etc/init.d/cjdns
echo ' ;;' >> /etc/init.d/cjdns
echo ' stop)' >> /etc/init.d/cjdns
echo ' stop' >> /etc/init.d/cjdns
echo ' exit 0' >> /etc/init.d/cjdns
echo ' ;;' >> /etc/init.d/cjdns
echo ' reload|restart|force-reload)' >> /etc/init.d/cjdns
echo ' stop' >> /etc/init.d/cjdns
echo ' sleep 1' >> /etc/init.d/cjdns
echo ' start' >> /etc/init.d/cjdns
echo ' exit 0' >> /etc/init.d/cjdns
echo ' ;;' >> /etc/init.d/cjdns
echo ' status)' >> /etc/init.d/cjdns
echo ' status' >> /etc/init.d/cjdns
echo ' exit 0' >> /etc/init.d/cjdns
echo ' ;;' >> /etc/init.d/cjdns
echo ' update|upgrade)' >> /etc/init.d/cjdns
echo ' update' >> /etc/init.d/cjdns
echo ' stop' >> /etc/init.d/cjdns
echo ' sleep 2' >> /etc/init.d/cjdns
echo ' start' >> /etc/init.d/cjdns
echo ' exit 0' >> /etc/init.d/cjdns
echo ' ;;' >> /etc/init.d/cjdns
echo ' **)' >> /etc/init.d/cjdns
echo ' echo "Usage: $0 (start|stop|restart|status|update)" 1>&2' >> /etc/init.d/cjdns
echo ' exit 1' >> /etc/init.d/cjdns
echo ' ;;' >> /etc/init.d/cjdns
echo 'esac' >> /etc/init.d/cjdns
chmod +x /etc/init.d/cjdns
update-rc.d cjdns defaults
service cjdns start
if [ ! "$?" = "0" ]; then
systemctl status cjdns.service
exit 8260
fi
apt-get -y install radvd
echo 'interface eth0' > /etc/radvd.conf
echo '{' >> /etc/radvd.conf
echo ' AdvSendAdvert on;' >> /etc/radvd.conf
echo ' prefix fdfc::1/64' >> /etc/radvd.conf
echo ' {' >> /etc/radvd.conf
echo ' AdvRouterAddr on;' >> /etc/radvd.conf
echo ' };' >> /etc/radvd.conf
echo '};' >> /etc/radvd.conf
systemctl restart radvd
if [ ! "$?" = "0" ]; then
systemctl status radvd.service
exit 4395
fi
if ! grep -q "# Mesh Networking (cjdns)" /etc/network/interfaces; then
echo '' >> /etc/network/interfaces
echo '# Mesh Networking (cjdns)' >> /etc/network/interfaces
echo 'iface eth0 inet6 static' >> /etc/network/interfaces
echo ' pre-up modprobe ipv6' >> /etc/network/interfaces
echo ' address fdfc:0000:0000:0000:0000:0000:0000:0001' >> /etc/network/interfaces
echo ' netmask 64' >> /etc/network/interfaces
service network-manager restart
if [ ! "$?" = "0" ]; then
systemctl status networking.service
exit 6949
fi
fi
ip6tables -A INPUT -p udp --dport $CJDNS_PORT -j ACCEPT
ip6tables -A INPUT -p tcp --dport $CJDNS_PORT -j ACCEPT
function_ckeck save_firewall_settings
save_firewall_settings
if ! grep -q $"Mesh Networking (cjdns)" /home/$MY_USERNAME/README; then
CURRENT_IP_ADDRESS=$(ip addr show | grep "inet " | sed -n 2p | awk -F ' ' '{print $2}' | awk -F '/' '{print $1}')
echo '' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo $'Mesh Networking (cjdns)' >> /home/$MY_USERNAME/README
echo '=======================' >> /home/$MY_USERNAME/README
echo $"cjdns IPv6 address: $CJDNS_IPV6" >> /home/$MY_USERNAME/README
echo $"cjdns public key: $CJDNS_PUBLIC_KEY" >> /home/$MY_USERNAME/README
echo $"cjdns private key: $CJDNS_PRIVATE_KEY" >> /home/$MY_USERNAME/README
echo $"cjdns password: $CJDNS_PASSWORD" >> /home/$MY_USERNAME/README
echo $"cjdns port: $CJDNS_PORT" >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo $"Forward port $CJDNS_PORT from your internet router to the ${PROJECT_NAME}" >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo $'Below is an example of your connection credentials' >> /home/$MY_USERNAME/README
echo $'that you can give to other people so they can connect' >> /home/$MY_USERNAME/README
echo $'to you using your default password' >> /home/$MY_USERNAME/README
echo $'Adding a unique password for each user is advisable' >> /home/$MY_USERNAME/README
echo $'so that leaks can be isolated.' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo "\"$CURRENT_IP_ADDRESS:$CJDNS_PORT\":{\"password\":\"$CJDNS_PASSWORD\",\"publicKey\":\"$CJDNS_PUBLIC_KEY\"}" >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo $'More is not better. 3-5 cjdns peers is good. 30 peers is bad.' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo $'NEVER USE A PUBLIC PEER. These degrade the network and make it centralized.' >> /home/$MY_USERNAME/README
echo $'Each node can handle many peers, but no node can handle the entire internet.' >> /home/$MY_USERNAME/README
echo $'As this network grows any public peer will simply become saturated and' >> /home/$MY_USERNAME/README
echo $'useless causing issues for the entire network.' >> /home/$MY_USERNAME/README
echo $'Please report anyone offering you a public peer as they are promoting shared' >> /home/$MY_USERNAME/README
echo $'passwords which could lead to people pretending to be you. A peering pass' >> /home/$MY_USERNAME/README
echo $'should not contain someone elses nickname or info but should contain yours' >> /home/$MY_USERNAME/README
echo $'to ensure it is not shared. It also helps when editing the conf to know who' >> /home/$MY_USERNAME/README
echo $'each password is for.' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo $'Possible cjdns destinations of interest:' >> /home/$MY_USERNAME/README
echo ' http://transitiontech.ca/faq' >> /home/$MY_USERNAME/README
echo ' http://cjdns.ca/hypeirc.txt' >> /home/$MY_USERNAME/README
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/README
chmod 600 /home/$MY_USERNAME/README
fi
echo 'mesh_cjdns' >> $COMPLETION_FILE
if [[ $ENABLE_CJDNS != "yes" ]]; then
return
fi
# update to the next commit
function_check set_repo_commit
set_repo_commit /etc/cjdns "cjdns commit" "$CJDNS_COMMIT" $CJDNS_REPO
if grep -Fxq "mesh_cjdns" $COMPLETION_FILE; then
return
fi
apt-get -y install nodejs git build-essential nmap
# if a README exists then obtain the cjdns parameters
function_check get_cjdns_ipv6_address
get_cjdns_ipv6_address
function_check get_cjdns_public_key
get_cjdns_public_key
function_check get_cjdns_private_key
get_cjdns_private_key
function_check get_cjdns_port
get_cjdns_port
function_check get_cjdns_password
get_cjdns_password
# special compile settings for running ./do on the Beaglebone Black
if [[ $INSTALLING_ON_BBB == "yes" ]]; then
CFLAGS="-O2 -march=armv7-a -mtune=cortex-a8 -mfpu=neon -ftree-vectorize -ffast-math -mfloat-abi=hard -marm -Wno-error=maybe-uninitialized"
export LDFLAGS="$CFLAGS"
fi
if [ ! -d /etc/cjdns ]; then
function_check git_pull
git_clone $CJDNS_REPO /etc/cjdns
cd /etc/cjdns
git checkout $CJDNS_COMMIT -b $CJDNS_COMMIT
if ! grep -q "cjdns commit" $COMPLETION_FILE; then
echo "cjdns commit:$CJDNS_COMMIT" >> $COMPLETION_FILE
else
sed -i "s/cjdns commit.*/cjdns commit:$CJDNS_COMMIT/g" $COMPLETION_FILE
fi
./do
if [ ! "$?" = "0" ]; then
exit 7439
fi
# create a configuration
if [ ! -f /etc/cjdns/cjdroute.conf ]; then
./cjdroute --genconf > /etc/cjdns/cjdroute.conf
if [ ! "$?" = "0" ]; then
exit 5922
fi
fi
# create a user to run as
useradd cjdns
else
cd /etc/cjdns
function_check git_pull
git_pull $CJDNS_REPO
./do
if [ ! "$?" = "0" ]; then
exit 9926
fi
fi
# set permissions
chown -R cjdns:cjdns /etc/cjdns
chmod 600 /etc/cjdns/cjdroute.conf
/sbin/ip tuntap add mode tun user cjdns dev cjdroute0
# insert values into the configuration file
if [ $CJDNS_PRIVATE_KEY ]; then
sed -i "s/\"privateKey\":.*/\"privateKey\": \"$CJDNS_PRIVATE_KEY\",/g" /etc/cjdns/cjdroute.conf
else
CJDNS_PRIVATE_KEY=$(cat /etc/cjdns/cjdroute.conf | grep '"privateKey"' | awk -F '"' '{print $4}' | sed -n 1p)
fi
if [ $CJDNS_PUBLIC_KEY ]; then
sed -i "s/\"publicKey\":.*/\"publicKey\": \"$CJDNS_PUBLIC_KEY\",/g" /etc/cjdns/cjdroute.conf
else
CJDNS_PUBLIC_KEY=$(cat /etc/cjdns/cjdroute.conf | grep '"publicKey"' | awk -F '"' '{print $4}' | sed -n 1p)
fi
if [ $CJDNS_IPV6 ]; then
sed -i "s/\"ipv6\":.*/\"ipv6\": \"$CJDNS_IPV6\",/g" /etc/cjdns/cjdroute.conf
else
CJDNS_IPV6=$(cat /etc/cjdns/cjdroute.conf | grep '"ipv6"' | awk -F '"' '{print $4}' | sed -n 1p)
fi
if [ $CJDNS_PASSWORD ]; then
sed -i "0,/{\"password\":.*/s//{\"password\": \"$CJDNS_PASSWORD\"}/g" /etc/cjdns/cjdroute.conf
else
CJDNS_PASSWORD=$(cat /etc/cjdns/cjdroute.conf | grep '"password"' | awk -F '"' '{print $4}' | sed -n 1p)
fi
if [ $CJDNS_PORT ]; then
sed -i "s/\"bind\": \"0.0.0.0:.*/\"bind\": \"0.0.0.0:$CJDNS_PORT\",/g" /etc/cjdns/cjdroute.conf
else
CJDNS_PORT=$(cat /etc/cjdns/cjdroute.conf | grep '"bind": "0.0.0.0:' | awk -F '"' '{print $4}' | awk -F ':' '{print $2}' | sed -n 1p)
fi
function_check enable_ipv6
enable_ipv6
echo '#!/bin/sh -e' > /etc/init.d/cjdns
echo '### BEGIN INIT INFO' >> /etc/init.d/cjdns
echo '# hyperboria.sh - An init script (/etc/init.d/) for cjdns' >> /etc/init.d/cjdns
echo '# Provides: cjdroute' >> /etc/init.d/cjdns
echo '# Required-Start: $remote_fs $network' >> /etc/init.d/cjdns
echo '# Required-Stop: $remote_fs $network' >> /etc/init.d/cjdns
echo '# Default-Start: 2 3 4 5' >> /etc/init.d/cjdns
echo '# Default-Stop: 0 1 6' >> /etc/init.d/cjdns
echo '# Short-Description: Cjdns router' >> /etc/init.d/cjdns
echo '# Description: A routing engine designed for security, scalability, speed and ease of use.' >> /etc/init.d/cjdns
echo '# cjdns git repo: https://github.com/cjdelisle/cjdns/' >> /etc/init.d/cjdns
echo '### END INIT INFO' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo 'PROG="cjdroute"' >> /etc/init.d/cjdns
echo 'GIT_PATH="/etc/cjdns"' >> /etc/init.d/cjdns
echo 'PROG_PATH="/etc/cjdns"' >> /etc/init.d/cjdns
echo 'CJDNS_CONFIG="cjdroute.conf"' >> /etc/init.d/cjdns
echo 'CJDNS_USER="cjdns"' >> /etc/init.d/cjdns
echo "CJDNS_IP='$CJDNS_IPV6'" >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo 'start() {' >> /etc/init.d/cjdns
echo ' # Start it up with the user cjdns' >> /etc/init.d/cjdns
echo ' if [ $(pgrep cjdroute | wc -l) != 0 ];' >> /etc/init.d/cjdns
echo ' then' >> /etc/init.d/cjdns
echo ' echo "cjdroute is already running. Doing nothing..."' >> /etc/init.d/cjdns
echo ' else' >> /etc/init.d/cjdns
echo ' echo " * Starting cjdroute"' >> /etc/init.d/cjdns
echo ' su -c "$PROG_PATH/$PROG < $PROG_PATH/$CJDNS_CONFIG" - $CJDNS_USER' >> /etc/init.d/cjdns
echo ' /sbin/ip addr add $CJDNS_IP/8 dev tun0' >> /etc/init.d/cjdns
echo ' /sbin/ip link set mtu 1312 dev tun0' >> /etc/init.d/cjdns
echo ' /sbin/ip link set tun0 up' >> /etc/init.d/cjdns
echo ' /sbin/ip tuntap add mode tun user cjdns dev tun0' >> /etc/init.d/cjdns
echo ' fi' >> /etc/init.d/cjdns
echo '}' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo 'stop() {' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo ' if [ $(pgrep cjdroute | wc -l) != 2 ];' >> /etc/init.d/cjdns
echo ' then' >> /etc/init.d/cjdns
echo ' echo "cjdns isnt running."' >> /etc/init.d/cjdns
echo ' else' >> /etc/init.d/cjdns
echo ' echo "Killing cjdroute"' >> /etc/init.d/cjdns
echo ' killall cjdroute' >> /etc/init.d/cjdns
echo ' fi' >> /etc/init.d/cjdns
echo '}' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo 'status() {' >> /etc/init.d/cjdns
echo ' if [ $(pgrep cjdroute | wc -l) != 0 ];' >> /etc/init.d/cjdns
echo ' then' >> /etc/init.d/cjdns
echo ' echo "Cjdns is running"' >> /etc/init.d/cjdns
echo ' else' >> /etc/init.d/cjdns
echo ' echo "Cjdns is not running"' >> /etc/init.d/cjdns
echo ' fi' >> /etc/init.d/cjdns
echo '}' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo ' update() {' >> /etc/init.d/cjdns
echo ' cd $GIT_PATH' >> /etc/init.d/cjdns
echo ' echo "Updating..."' >> /etc/init.d/cjdns
echo ' git pull' >> /etc/init.d/cjdns
echo ' ./do' >> /etc/init.d/cjdns
echo '}' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo '## Check to see if we are running as root first.' >> /etc/init.d/cjdns
echo 'if [ "$(id -u)" != "0" ]; then' >> /etc/init.d/cjdns
echo ' echo "This script must be run as root" 1>&2' >> /etc/init.d/cjdns
echo ' exit 1' >> /etc/init.d/cjdns
echo 'fi' >> /etc/init.d/cjdns
echo '' >> /etc/init.d/cjdns
echo 'case $1 in' >> /etc/init.d/cjdns
echo ' start)' >> /etc/init.d/cjdns
echo ' start' >> /etc/init.d/cjdns
echo ' exit 0' >> /etc/init.d/cjdns
echo ' ;;' >> /etc/init.d/cjdns
echo ' stop)' >> /etc/init.d/cjdns
echo ' stop' >> /etc/init.d/cjdns
echo ' exit 0' >> /etc/init.d/cjdns
echo ' ;;' >> /etc/init.d/cjdns
echo ' reload|restart|force-reload)' >> /etc/init.d/cjdns
echo ' stop' >> /etc/init.d/cjdns
echo ' sleep 1' >> /etc/init.d/cjdns
echo ' start' >> /etc/init.d/cjdns
echo ' exit 0' >> /etc/init.d/cjdns
echo ' ;;' >> /etc/init.d/cjdns
echo ' status)' >> /etc/init.d/cjdns
echo ' status' >> /etc/init.d/cjdns
echo ' exit 0' >> /etc/init.d/cjdns
echo ' ;;' >> /etc/init.d/cjdns
echo ' update|upgrade)' >> /etc/init.d/cjdns
echo ' update' >> /etc/init.d/cjdns
echo ' stop' >> /etc/init.d/cjdns
echo ' sleep 2' >> /etc/init.d/cjdns
echo ' start' >> /etc/init.d/cjdns
echo ' exit 0' >> /etc/init.d/cjdns
echo ' ;;' >> /etc/init.d/cjdns
echo ' **)' >> /etc/init.d/cjdns
echo ' echo "Usage: $0 (start|stop|restart|status|update)" 1>&2' >> /etc/init.d/cjdns
echo ' exit 1' >> /etc/init.d/cjdns
echo ' ;;' >> /etc/init.d/cjdns
echo 'esac' >> /etc/init.d/cjdns
chmod +x /etc/init.d/cjdns
update-rc.d cjdns defaults
service cjdns start
if [ ! "$?" = "0" ]; then
systemctl status cjdns.service
exit 8260
fi
apt-get -y install radvd
echo 'interface eth0' > /etc/radvd.conf
echo '{' >> /etc/radvd.conf
echo ' AdvSendAdvert on;' >> /etc/radvd.conf
echo ' prefix fdfc::1/64' >> /etc/radvd.conf
echo ' {' >> /etc/radvd.conf
echo ' AdvRouterAddr on;' >> /etc/radvd.conf
echo ' };' >> /etc/radvd.conf
echo '};' >> /etc/radvd.conf
systemctl restart radvd
if [ ! "$?" = "0" ]; then
systemctl status radvd.service
exit 4395
fi
if ! grep -q "# Mesh Networking (cjdns)" /etc/network/interfaces; then
echo '' >> /etc/network/interfaces
echo '# Mesh Networking (cjdns)' >> /etc/network/interfaces
echo 'iface eth0 inet6 static' >> /etc/network/interfaces
echo ' pre-up modprobe ipv6' >> /etc/network/interfaces
echo ' address fdfc:0000:0000:0000:0000:0000:0000:0001' >> /etc/network/interfaces
echo ' netmask 64' >> /etc/network/interfaces
service network-manager restart
if [ ! "$?" = "0" ]; then
systemctl status networking.service
exit 6949
fi
fi
ip6tables -A INPUT -p udp --dport $CJDNS_PORT -j ACCEPT
ip6tables -A INPUT -p tcp --dport $CJDNS_PORT -j ACCEPT
function_ckeck save_firewall_settings
save_firewall_settings
if ! grep -q $"Mesh Networking (cjdns)" /home/$MY_USERNAME/README; then
CURRENT_IP_ADDRESS=$(ip addr show | grep "inet " | sed -n 2p | awk -F ' ' '{print $2}' | awk -F '/' '{print $1}')
echo '' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo $'Mesh Networking (cjdns)' >> /home/$MY_USERNAME/README
echo '=======================' >> /home/$MY_USERNAME/README
echo $"cjdns IPv6 address: $CJDNS_IPV6" >> /home/$MY_USERNAME/README
echo $"cjdns public key: $CJDNS_PUBLIC_KEY" >> /home/$MY_USERNAME/README
echo $"cjdns private key: $CJDNS_PRIVATE_KEY" >> /home/$MY_USERNAME/README
echo $"cjdns password: $CJDNS_PASSWORD" >> /home/$MY_USERNAME/README
echo $"cjdns port: $CJDNS_PORT" >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo $"Forward port $CJDNS_PORT from your internet router to the ${PROJECT_NAME}" >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo $'Below is an example of your connection credentials' >> /home/$MY_USERNAME/README
echo $'that you can give to other people so they can connect' >> /home/$MY_USERNAME/README
echo $'to you using your default password' >> /home/$MY_USERNAME/README
echo $'Adding a unique password for each user is advisable' >> /home/$MY_USERNAME/README
echo $'so that leaks can be isolated.' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo "\"$CURRENT_IP_ADDRESS:$CJDNS_PORT\":{\"password\":\"$CJDNS_PASSWORD\",\"publicKey\":\"$CJDNS_PUBLIC_KEY\"}" >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo $'More is not better. 3-5 cjdns peers is good. 30 peers is bad.' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo $'NEVER USE A PUBLIC PEER. These degrade the network and make it centralized.' >> /home/$MY_USERNAME/README
echo $'Each node can handle many peers, but no node can handle the entire internet.' >> /home/$MY_USERNAME/README
echo $'As this network grows any public peer will simply become saturated and' >> /home/$MY_USERNAME/README
echo $'useless causing issues for the entire network.' >> /home/$MY_USERNAME/README
echo $'Please report anyone offering you a public peer as they are promoting shared' >> /home/$MY_USERNAME/README
echo $'passwords which could lead to people pretending to be you. A peering pass' >> /home/$MY_USERNAME/README
echo $'should not contain someone elses nickname or info but should contain yours' >> /home/$MY_USERNAME/README
echo $'to ensure it is not shared. It also helps when editing the conf to know who' >> /home/$MY_USERNAME/README
echo $'each password is for.' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo $'Possible cjdns destinations of interest:' >> /home/$MY_USERNAME/README
echo ' http://transitiontech.ca/faq' >> /home/$MY_USERNAME/README
echo ' http://cjdns.ca/hypeirc.txt' >> /home/$MY_USERNAME/README
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/README
chmod 600 /home/$MY_USERNAME/README
fi
function_check configure_firewall_for_cjdns
configure_firewall_for_cjdns
echo 'mesh_cjdns' >> $COMPLETION_FILE
}
function mesh_cjdns_tools {
if grep -Fxq "mesh_cjdns_tools" $COMPLETION_FILE; then
return
fi
if [[ $ENABLE_CJDNS != "yes" ]]; then
return
fi
if [ ! -d /etc/cjdns ]; then
mesh_cjdns
fi
function_check select_go_version
select_go_version
apt-get -y install golang mercurial
if [ ! -f ~/.bashrc ]; then
touch ~/.bashrc
fi
if [ ! -d /home/git ]; then
# add a gogs user account
adduser --disabled-login --gecos 'Gogs' git
# install Go
if ! grep -q "export GOPATH=" ~/.bashrc; then
echo "export GOPATH=$GOPATH" >> ~/.bashrc
fi
systemctl set-environment GOPATH=$GOPATH
if ! grep -q "systemctl set-environment GOPATH=" ~/.bashrc; then
echo "systemctl set-environment GOPATH=$GOPATH" >> ~/.bashrc
fi
if [ ! -d $GOPATH ]; then
mkdir -p $GOPATH
fi
fi
if ! grep -q "export GOPATH=" ~/.bashrc; then
echo "export GOPATH=$GOPATH" >> ~/.bashrc
fi
expected_go_path='export PATH=$PATH:'${GOPATH}'/bin'
export PATH=$PATH:${GOPATH}/bin
if ! grep -q "$expected_go_path" ~/.bashrc; then
echo "$expected_go_path" >> ~/.bashrc
fi
export PATH=$PATH:$GOPATH/bin
CJDCMD_REPO2=$(echo "$CJDCMD_REPO" | sed 's|https://||g')
go get $CJDCMD_REPO2
if [ ! -f $GOPATH/bin/cjdcmd ]; then
echo $'cjdcmd was not compiled. Check your golang installation'
exit 7439
fi
cp $GOPATH/bin/cjdcmd /usr/bin
# initialise from the cjdns config
/usr/bin/cjdcmd cjdnsadmin -file /etc/cjdns/cjdroute.conf
echo 'mesh_cjdns_tools' >> $COMPLETION_FILE
if grep -Fxq "mesh_cjdns_tools" $COMPLETION_FILE; then
return
fi
if [[ $ENABLE_CJDNS != "yes" ]]; then
return
fi
if [ ! -d /etc/cjdns ]; then
mesh_cjdns
fi
function_check select_go_version
select_go_version
apt-get -y install golang mercurial
if [ ! -f ~/.bashrc ]; then
touch ~/.bashrc
fi
if [ ! -d /home/git ]; then
# add a gogs user account
adduser --disabled-login --gecos 'Gogs' git
# install Go
if ! grep -q "export GOPATH=" ~/.bashrc; then
echo "export GOPATH=$GOPATH" >> ~/.bashrc
fi
systemctl set-environment GOPATH=$GOPATH
if ! grep -q "systemctl set-environment GOPATH=" ~/.bashrc; then
echo "systemctl set-environment GOPATH=$GOPATH" >> ~/.bashrc
fi
if [ ! -d $GOPATH ]; then
mkdir -p $GOPATH
fi
fi
if ! grep -q "export GOPATH=" ~/.bashrc; then
echo "export GOPATH=$GOPATH" >> ~/.bashrc
fi
expected_go_path='export PATH=$PATH:'${GOPATH}'/bin'
export PATH=$PATH:${GOPATH}/bin
if ! grep -q "$expected_go_path" ~/.bashrc; then
echo "$expected_go_path" >> ~/.bashrc
fi
export PATH=$PATH:$GOPATH/bin
CJDCMD_REPO2=$(echo "$CJDCMD_REPO" | sed 's|https://||g')
go get $CJDCMD_REPO2
if [ ! -f $GOPATH/bin/cjdcmd ]; then
echo $'cjdcmd was not compiled. Check your golang installation'
exit 7439
fi
cp $GOPATH/bin/cjdcmd /usr/bin
# initialise from the cjdns config
/usr/bin/cjdcmd cjdnsadmin -file /etc/cjdns/cjdroute.conf
echo 'mesh_cjdns_tools' >> $COMPLETION_FILE
}
# NOTE: deliberately no exit 0

21
src/freedombone-app-dlna

@ -28,6 +28,27 @@
# You should have received a copy of the GNU Affero General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
function configure_firewall_for_dlna {
if grep -Fxq "configure_firewall_for_dlna" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
if [[ $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" ]]; then
return
fi
iptables -A INPUT -p udp --dport 1900 -j ACCEPT
iptables -A INPUT -p tcp --dport 8200 -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=('DLNA 1900')
OPEN_PORTS+=('DLNA 8200')
echo 'configure_firewall_for_dlna' >> $COMPLETION_FILE
}
function install_dlna_server {
if grep -Fxq "install_dlna_server" $COMPLETION_FILE; then
return

28
src/freedombone-app-email

@ -78,6 +78,34 @@ GPGIT_COMMIT='583dc76119f19420f8a33f606744faa7c8922738'
# refresh gpg keys every few hours
REFRESH_GPG_KEYS_HOURS=2
function configure_firewall_for_email {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" || $SYSTEM_TYPE == "$VARIANT_DEVELOPER" || $SYSTEM_TYPE == "$VARIANT_MESH" || $SYSTEM_TYPE == "$VARIANT_NONMAILBOX" ]]; then
return
fi
if grep -Fxq "configure_firewall_for_email" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p tcp --dport 25 -j ACCEPT
iptables -A INPUT -p tcp --dport 587 -j ACCEPT
iptables -A INPUT -p tcp --dport 465 -j ACCEPT
iptables -A INPUT -p tcp --dport 993 -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=('Email 25')
OPEN_PORTS+=('Email 587')
OPEN_PORTS+=('Email 465')
OPEN_PORTS+=('Email 993')
echo 'configure_firewall_for_email' >> $COMPLETION_FILE
}
function encrypt_incoming_email {
# encrypts incoming mail using your GPG public key
# so even if an attacker gains access to the data at rest they still need

21
src/freedombone-app-ipfs

@ -32,6 +32,24 @@ IPFS_GO_REPO="https://github.com/ipfs/go-ipfs"
IPFS_COMMIT='20b06a4cbce8884f5b194da6e98cb11f2c77f166'
IPFS_PORT=4001
function configure_firewall_for_ipfs {
if [[ $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CHAT" ]]; then
return
fi
if grep -Fxq "configure_firewall_for_ipfs" $COMPLETION_FILE; then
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p tcp --dport $IPFS_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("IPFS $IPFS_PORT")
echo 'configure_firewall_for_ipfs' >> $COMPLETION_FILE
}
function install_ipfs {
if [[ $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" ]]; then
return
@ -163,5 +181,8 @@ function install_ipfs {
rm /tmp/ipfsid
fi
function_check configure_firewall_for_ipfs
configure_firewall_for_ipfs
echo 'install_ipfs' >> $COMPLETION_FILE
}

23
src/freedombone-app-irc

@ -34,6 +34,29 @@ IRC_ONION_PORT=6697
# An optional password to log into IRC. This applies to all users
IRC_PASSWORD=
function configure_firewall_for_irc {
if [ ! -d /etc/ngircd ]; then
return
fi
if grep -Fxq "configure_firewall_for_irc" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p tcp --dport $IRC_PORT -j ACCEPT
iptables -I INPUT -p tcp --dport 1024:65535 --sport $IRC_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("IRC $IRC_PORT")
echo 'configure_firewall_for_irc' >> $COMPLETION_FILE
}
function install_irc_server {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" || $SYSTEM_TYPE == "$VARIANT_DEVELOPER" || $SYSTEM_TYPE == "$VARIANT_MESH" ]]; then
return

19
src/freedombone-app-mumble

@ -53,6 +53,25 @@ function get_voip_server_password {
fi
}
function configure_firewall_for_voip {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" || $SYSTEM_TYPE == "$VARIANT_DEVELOPER" ]]; then
return
fi
if grep -Fxq "configure_firewall_for_voip" $COMPLETION_FILE; then
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p udp --dport $VOIP_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $VOIP_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("Mumble $VOIP_PORT")
echo 'configure_firewall_for_voip' >> $COMPLETION_FILE
}
function install_mumble {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" || $SYSTEM_TYPE == "$VARIANT_DEVELOPER" ]]; then
return

44
src/freedombone-app-sip

@ -35,6 +35,50 @@ VOIP_TURN_PORT=3478
VOIP_TURN_TLS_PORT=5349
VOIP_TURN_NONCE=
function configure_firewall_for_voip_turn {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" || $SYSTEM_TYPE == "$VARIANT_DEVELOPER" ]]; then
return
fi
if grep -Fxq "configure_firewall_for_voip_turn" $COMPLETION_FILE; then
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p udp --dport $VOIP_TURN_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $VOIP_TURN_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $VOIP_TURN_TLS_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("TURN $VOIP_TURN_PORT")
OPEN_PORTS+=("TURN TLS $VOIP_TURN_TLS_PORT")
echo 'configure_firewall_for_voip_turn' >> $COMPLETION_FILE
}
function configure_firewall_for_sip4 {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" || $SYSTEM_TYPE == "$VARIANT_DEVELOPER" ]]; then
return
fi
if grep -Fxq "configure_firewall_for_sip4" $COMPLETION_FILE; then
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p udp --dport $SIP_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $SIP_PORT -j ACCEPT
iptables -A INPUT -p udp --dport $SIP_TLS_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $SIP_TLS_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("SIP $SIP_PORT")
OPEN_PORTS+=("SIP TLS $SIP_TLS_PORT")
echo 'configure_firewall_for_sip4' >> $COMPLETION_FILE
}
function get_sip_server_password {
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "SIP server password" /home/$MY_USERNAME/README; then

13
src/freedombone-app-syncthing

@ -37,6 +37,19 @@ SYNCTHING_PORT=22000
SYNCTHING_SHARED_DATA=/var/lib/syncthing/SyncShared
SYNCTHING_USER_IDS_FILE='.syncthingids'
function configure_firewall_for_syncthing {
if grep -Fxq "configure_firewall_for_syncthing" $COMPLETION_FILE; then
return
fi
iptables -A INPUT -p udp --dport $SYNCTHING_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $SYNCTHING_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("Syncthing $SYNCTHING_PORT")
echo 'configure_firewall_for_syncthing' >> $COMPLETION_FILE
}
function install_syncthing {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" || $SYSTEM_TYPE == "$VARIANT_DEVELOPER" || $SYSTEM_TYPE == "$VARIANT_MESH" ]]; then
return

19
src/freedombone-app-tox

@ -44,6 +44,25 @@ TOXIC_REPO="https://github.com/Tox/toxic"
TOXIC_COMMIT='cf16849b374e484a33a4dffa3dfb937b59d537f2'
TOXIC_FILE=/usr/local/bin/toxic
function configure_firewall_for_tox {
if grep -Fxq "configure_firewall_for_tox" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p tcp --dport $TOX_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("Tox $TOX_PORT")
echo 'configure_firewall_for_tox' >> $COMPLETION_FILE
}
function tox_avahi {
if [[ $SYSTEM_TYPE != "$VARIANT_MESH" ]]; then
return

26
src/freedombone-app-xmpp

@ -35,6 +35,32 @@ XMPP_PASSWORD=
XMPP_CIPHERS='"EDH+CAMELLIA:EDH+aRSA:EECDH+aRSA+AESGCM:EECDH+aRSA+SHA256:EECDH:+CAMELLIA128:+AES128:+SSLv3:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!DSS:!RC4:!SEED:!IDEA:!ECDSA:kEDH:CAMELLIA128-SHA:AES128-SHA"'
XMPP_ECC_CURVE='"secp384r1"'
function configure_firewall_for_xmpp {
if [ ! -d /etc/prosody ]; then
return
fi
if grep -Fxq "configure_firewall_for_xmpp" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p tcp --dport 5222:5223 -j ACCEPT
iptables -A INPUT -p tcp --dport 5269 -j ACCEPT
iptables -A INPUT -p tcp --dport 5280:5281 -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=('XMPP 5222-5223')
OPEN_PORTS+=('XMPP 5269')
OPEN_PORTS+=('XMPP 5280-5281')
echo 'configure_firewall_for_xmpp' >> $COMPLETION_FILE
}
function update_prosody_modules {
if [ ! -d $INSTALL_DIR/prosody-modules ]; then
return

20
src/freedombone-app-zeronet

@ -45,6 +45,26 @@ ZERONET_DEFAULT_MAIL_TAGLINE="Mail for the Mesh"
ZERONET_ID_REPO="https://github.com/HelloZeroNet/ZeroID"
ZERONET_ID_COMMIT='ccf14fdc96fa9cdb2ddd8a7ab283a8e17a4f234b'
function configure_firewall_for_zeronet {
if grep -Fxq "configure_firewall_for_zeronet" $COMPLETION_FILE; then
return
fi
if [[ $SYSTEM_TYPE != "$VARIANT_MESH" ]]; then
return
fi
iptables -A INPUT -i $WIFI_INTERFACE -p udp --dport $ZERONET_PORT -j ACCEPT
iptables -A INPUT -i $WIFI_INTERFACE -p tcp --dport $ZERONET_PORT -j ACCEPT
iptables -A INPUT -i $WIFI_INTERFACE -p udp --dport $TRACKER_PORT -j ACCEPT
iptables -A INPUT -i $WIFI_INTERFACE -p tcp --dport $TRACKER_PORT -j ACCEPT
iptables -A INPUT -i $WIFI_INTERFACE -p udp --dport 1900 -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("ZeroNet $ZERONET_PORT")
OPEN_PORTS+=("Tracker $TRACKER_PORT")
echo 'configure_firewall_for_zeronet' >> $COMPLETION_FILE
}
function install_zeronet_blog {
if [[ $SYSTEM_TYPE != "$VARIANT_MESH" ]]; then
return

273
src/freedombone-utils-firewall

@ -103,100 +103,6 @@ function configure_firewall_ping {
echo 'configure_firewall_ping' >> $COMPLETION_FILE
}
function configure_firewall_for_voip {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" || $SYSTEM_TYPE == "$VARIANT_DEVELOPER" ]]; then
return
fi
if grep -Fxq "configure_firewall_for_voip" $COMPLETION_FILE; then
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p udp --dport $VOIP_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $VOIP_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("Mumble $VOIP_PORT")
echo 'configure_firewall_for_voip' >> $COMPLETION_FILE
}
function configure_firewall_for_syncthing {
if grep -Fxq "configure_firewall_for_syncthing" $COMPLETION_FILE; then
return
fi
iptables -A INPUT -p udp --dport $SYNCTHING_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $SYNCTHING_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("Syncthing $SYNCTHING_PORT")
echo 'configure_firewall_for_syncthing' >> $COMPLETION_FILE
}
function configure_firewall_for_voip_turn {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" || $SYSTEM_TYPE == "$VARIANT_DEVELOPER" ]]; then
return
fi
if grep -Fxq "configure_firewall_for_voip_turn" $COMPLETION_FILE; then
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p udp --dport $VOIP_TURN_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $VOIP_TURN_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $VOIP_TURN_TLS_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("TURN $VOIP_TURN_PORT")
OPEN_PORTS+=("TURN TLS $VOIP_TURN_TLS_PORT")
echo 'configure_firewall_for_voip_turn' >> $COMPLETION_FILE
}
function configure_firewall_for_sip4 {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" || $SYSTEM_TYPE == "$VARIANT_DEVELOPER" ]]; then
return
fi
if grep -Fxq "configure_firewall_for_sip4" $COMPLETION_FILE; then
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p udp --dport $SIP_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $SIP_PORT -j ACCEPT
iptables -A INPUT -p udp --dport $SIP_TLS_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $SIP_TLS_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("SIP $SIP_PORT")
OPEN_PORTS+=("SIP TLS $SIP_TLS_PORT")
echo 'configure_firewall_for_sip4' >> $COMPLETION_FILE
}
function configure_firewall_for_ipfs {
if [[ $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CHAT" ]]; then
return
fi
if grep -Fxq "configure_firewall_for_ipfs" $COMPLETION_FILE; then
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p tcp --dport $IPFS_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("IPFS $IPFS_PORT")
echo 'configure_firewall_for_ipfs' >> $COMPLETION_FILE
}
function configure_firewall_for_avahi {
if grep -Fxq "configure_firewall_for_avahi" $COMPLETION_FILE; then
return
@ -212,89 +118,6 @@ function configure_firewall_for_avahi {
echo 'configure_firewall_for_avahi' >> $COMPLETION_FILE
}
function configure_firewall_for_cjdns {
if grep -Fxq "configure_firewall_for_cjdns" $COMPLETION_FILE; then
return
fi
if [[ $ENABLE_CJDNS != "yes" ]]; then
return
fi
ip6tables -t nat -A POSTROUTING -o tun0 -j MASQUERADE
ip6tables -A FORWARD -i tun0 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
echo 'configure_firewall_for_cjdns' >> $COMPLETION_FILE
}
function configure_firewall_for_batman {
if grep -Fxq "configure_firewall_for_batman" $COMPLETION_FILE; then
return
fi
if [[ $ENABLE_BATMAN != "yes" ]]; then
return
fi
function_check save_firewall_settings
save_firewall_settings
echo 'configure_firewall_for_batman' >> $COMPLETION_FILE
}
function configure_firewall_for_babel {
if grep -Fxq "configure_firewall_for_babel" $COMPLETION_FILE; then
return
fi
if [[ $ENABLE_BABEL != "yes" ]]; then
return
fi
iptables -A INPUT -i $WIFI_INTERFACE -p udp --dport $BABEL_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("Babel $BABEL_PORT")
echo 'configure_firewall_for_babel' >> $COMPLETION_FILE
}
function configure_firewall_for_zeronet {
if grep -Fxq "configure_firewall_for_zeronet" $COMPLETION_FILE; then
return
fi
if [[ $SYSTEM_TYPE != "$VARIANT_MESH" ]]; then
return
fi
iptables -A INPUT -i $WIFI_INTERFACE -p udp --dport $ZERONET_PORT -j ACCEPT
iptables -A INPUT -i $WIFI_INTERFACE -p tcp --dport $ZERONET_PORT -j ACCEPT
iptables -A INPUT -i $WIFI_INTERFACE -p udp --dport $TRACKER_PORT -j ACCEPT
iptables -A INPUT -i $WIFI_INTERFACE -p tcp --dport $TRACKER_PORT -j ACCEPT
iptables -A INPUT -i $WIFI_INTERFACE -p udp --dport 1900 -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("ZeroNet $ZERONET_PORT")
OPEN_PORTS+=("Tracker $TRACKER_PORT")
echo 'configure_firewall_for_zeronet' >> $COMPLETION_FILE
}
function configure_firewall_for_dlna {
if grep -Fxq "configure_firewall_for_dlna" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
if [[ $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" ]]; then
return
fi
iptables -A INPUT -p udp --dport 1900 -j ACCEPT
iptables -A INPUT -p tcp --dport 8200 -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=('DLNA 1900')
OPEN_PORTS+=('DLNA 8200')
echo 'configure_firewall_for_dlna' >> $COMPLETION_FILE
}
function configure_firewall_for_dns {
if grep -Fxq "configure_firewall_for_dns" $COMPLETION_FILE; then
return
@ -309,55 +132,6 @@ function configure_firewall_for_dns {
echo 'configure_firewall_for_dns' >> $COMPLETION_FILE
}
function configure_firewall_for_xmpp {
if [ ! -d /etc/prosody ]; then
return
fi
if grep -Fxq "configure_firewall_for_xmpp" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p tcp --dport 5222:5223 -j ACCEPT
iptables -A INPUT -p tcp --dport 5269 -j ACCEPT
iptables -A INPUT -p tcp --dport 5280:5281 -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=('XMPP 5222-5223')
OPEN_PORTS+=('XMPP 5269')
OPEN_PORTS+=('XMPP 5280-5281')
echo 'configure_firewall_for_xmpp' >> $COMPLETION_FILE
}
function configure_firewall_for_irc {
if [ ! -d /etc/ngircd ]; then
return
fi
if grep -Fxq "configure_firewall_for_irc" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p tcp --dport $IRC_PORT -j ACCEPT
iptables -I INPUT -p tcp --dport 1024:65535 --sport $IRC_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("IRC $IRC_PORT")
echo 'configure_firewall_for_irc' >> $COMPLETION_FILE
}
function configure_firewall_for_web_access {
if grep -Fxq "configure_firewall_for_web_access" $COMPLETION_FILE; then
return
@ -398,25 +172,6 @@ function configure_firewall_for_web_server {
echo 'configure_firewall_for_web_server' >> $COMPLETION_FILE
}
function configure_firewall_for_tox {
if grep -Fxq "configure_firewall_for_tox" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p tcp --dport $TOX_PORT -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=("Tox $TOX_PORT")
echo 'configure_firewall_for_tox' >> $COMPLETION_FILE
}
function configure_firewall_for_ssh {
if grep -Fxq "configure_firewall_for_ssh" $COMPLETION_FILE; then
return
@ -453,34 +208,6 @@ function configure_firewall_for_git {
echo 'configure_firewall_for_git' >> $COMPLETION_FILE
}
function configure_firewall_for_email {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" || $SYSTEM_TYPE == "$VARIANT_DEVELOPER" || $SYSTEM_TYPE == "$VARIANT_MESH" || $SYSTEM_TYPE == "$VARIANT_NONMAILBOX" ]]; then
return
fi
if grep -Fxq "configure_firewall_for_email" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
if [[ $ONION_ONLY != "no" ]]; then
return
fi
iptables -A INPUT -p tcp --dport 25 -j ACCEPT
iptables -A INPUT -p tcp --dport 587 -j ACCEPT
iptables -A INPUT -p tcp --dport 465 -j ACCEPT
iptables -A INPUT -p tcp --dport 993 -j ACCEPT
function_check save_firewall_settings
save_firewall_settings
OPEN_PORTS+=('Email 25')
OPEN_PORTS+=('Email 587')
OPEN_PORTS+=('Email 465')
OPEN_PORTS+=('Email 993')
echo 'configure_firewall_for_email' >> $COMPLETION_FILE
}
function configure_internet_protocol {
if grep -Fxq "configure_internet_protocol" $COMPLETION_FILE; then
return

Loading…
Cancel
Save